|
Summary: |
|
new hands free
intercoms from eclipse line
VX2300 new digital
system 2 wire bus video
NEW
4000 SERIES videokit vk4k
NEW
4000 SERIES ACCESS CONTROL MODUlES
NEW 4000 SERIES Digiphone Kit
NEW DECT Kit
NEW HANDS FREE VIDEOPHONE
VX2200 Digital System
-
Technical manual has been
updated to version 2006 1.0 with new diagrams, new units (VX4202, 4202R, 4202V, 4202RV) and more details about
3000 series intercoms and video intercoms.
Access Control Systems
|
|
|
PREliminary information
- NEW VX2300 digital system

VIDEX
have developed a new 2 wire video door entry system.
The VX2300 system is in
the final stages of development and will have the following features:
-
2 wire bus (not
polarity conscious);
-
Up to 100 meters
using standard telephone cable;
-
Up to 8 video
outdoor stations (b&w or colour camera);
-
Digital or
functional front panels;
-
Digital front panels
with speech playback (panels are programmable from PC)
-
Up to 64 extensions;
-
Up to 4 devices on
each extension;
-
Intercommunication
between devices on the same extension;
-
Local door bell
facility;
-
Active floor
divider;
-
Availability of
relay modules for extra services directly connected to the bus;
-
Electric lock
powered by the outdoor station.
The information above is
preliminary. Design and features may vary on the finished product.
|
|
|
preliminary information
- new 4000 series videokit

Within
the next months, VIDEX will put on the market the new 4000 series video kit
VK4K.
In comparison with previous video kits, the VK4K,
in addition to the new outdoor station, introduces a number of news
regarding the operation and the installation:
-
Up to 2 outdoor stations with up to 2 call push
buttons for 2 different videophones;
-
Up to 3 internal peripherals connected in
parallel (additional videophone, extension sounder etc.);
-
Disable Friendly -
Acoustic and Visual signalling of the system operation
(busy, call in progress, conversation in progress and door open
signalling);
-
Recall (selective entrance recall on system
with 2 outdoor stations);
-
Intercommunications between internal stations;
-
Local call with a different tone from the
external one;
-
Videophone with “Privacy” On/Off facility (for
latch or timed privacy activation);
-
Call, conversation and door opening time
programmable;
-
Output to drive directly the electric lock or
trough relay dry contacts;
-
Power supply connectable to the videophone or
to the outdoor station.
The system feature and the design outdoor station
are preliminary so the final product may differ for features and design from
the showed one. |
|
|
Preliminary Information - NEW
4000 SERIES ACCESS CONTROL MODUles
 The new 4000 Series is undergoing continuous enhancement and improvement to
the range of modules available. This will allow even greater flexibility to
the specifier, installer and end user. Within the next few months, two new
modules
will be available. A fingerprint reader (tob left) and new proximity reader
(bottom right) will be added to the ever expanding range of modules. Both
units will be available in either stand-alone version (for smaller
installations) or can be connected in series (with optional PC) for multiple
door applications using a serial bus. |
|
|
NEW 4000 SERIES Digiphone
Kit
Videx keep up the audio/video kit tradition by
introducing the new DIGIPHONE KIT DK4K. The kit is based on the new 4000
Series outdoor stations. In addition to facilities available on standard
audio door entry systems, the DIGIPHONE Kit incorporates the added facility
to open the door from outside by entering a secret code on the digital
codelock contained within the kit. The digital codelock included, has three
programmable codes and 3 relays (1 code for each relay), the 3 relays can be
connected to activate a variety of services which include operating a door
release, operating a gate or switching on lights etc.
The Kit Includes:
-
1 4000 Series Flush or surface mounting unit,
comprising 1 speaker module and 1 codelock module.
-
1 3000 Series Smart Line Intercom.
-
1 Power Supply.
The system is based on "3+1" and requires only 4
wires from the outdoor station to the intercom, 2 wires for the electric
lock and 2 wires for the power supply.
The kit is available for flush or surface
installation, with front panels manufactured in stainless steel (standard
finish) or anodized aluminium. The module support frame is supplied in gun
metal grey (standard finish) with options for silver chromium plating or
gold chromium plating.
For those not familiar with Videx and there Kit
range. All kits are supplied with the minimum parts required to complete an
installation. This does not include electric strikes or cable which are site
sensitive.
Videx produce a wide range of audio/video door
entry kits which will satisfy all market requirements. |
|
|
DECT KIT
This kit allows the conversion of a standard VIDEX
"4+1" one button audio door entry system to a wireless audio door entry
system.
It is very useful when you have to install an audio
door entry system but the wiring is not allowed (old buildings etc.).
The Art.460 kit incorporates 2 DECT TRANSCEIVER
Interfaces (Art.461) that provide a wireless audio link between an external
door station and an internal telephone. The unit operates on DECT technology
(Digital Enhanced Cordless Telecommunications) and allows a maximum distance
of 100 meters between the door station and the internal telephone (open
air). However obstacles such as walls will reduce the range and we suggest
not attempting more than 30 meters in these circumstances.
The two DECT interfaces provided are identical: the
one linked to the telephone must be programmed using the dip switches as
internal while the one linked to the door station ("4+1") must be programmed
as external. The two DECT units, in addition to door open service, allow the
activation of a remote service in both directions (outside to inside and
vice versa). Total privacy of a conversation between the door station and
telephone handset is ensured as the individual units are coded to match each
other. To one external unit can be registered up to 6 internal units (all
activated at the same time by the call). |
|
|
Preliminary Information -
New
HANDS FREE VIDEOPHONE
VIDEX have developed a new hands free videophone. The product is in the
final stages of development and will have the following features:
The videophone will be available in flush or surface mount versions and the
surface version will have the option of a handset.
The hands free videophone will be able to work with coax traditional video
systems operating with control unit Art.890 and outdoor stations from 800 or
4000 series.
The information above is preliminary. Design and features may vary on the
finished product. |
|
 |
 |
 |
|
Flush |
Surface plus handset |
Surface without handset |
|
|

New Control
Unit VproX 4000
Includes
all the functions of VproX-1000, plus the followings additional features:
-
Memory capability up to 4000 keys
-
Internal memory for the ‘Event Report’ now stores up to 2048 events
-
‘Direct copy’ function to copy the ‘Main’ memory module onto ‘Backup’ memory
module
-
Control of ‘VproX-4000/DM’ door monitoring device, to monitor the door
status from the PC.
-
Fully compatible with the advanced PC software‘VP4000’.
|
|
|
Door monitoring
unit VproX 4000/DM
Door monitoring unit compatible with the VproX-4000 system. This device
enables the monitoring of doors for either being open or closed. Four doors
can be monitored by each unit. The information will be relayed to the
VproX-4000 controller and from there on to the PC. The PC can then monitor
the length of time a door is open and if necessary activate an alarm. This
greatly improves the security level of the VproX-4000 system. It is possible
to connect up to 5 door monitoring units in parallel (To control up to 20
doors max.) on the same serial BUS used by VproX- 1000/A sub
units (Three wire bus).
Available in a plastic, standard 5 module A type DIN box with 12Vdc 1VA max
power supply with the facility to connect a 12V – 2A backup battery |
|
|
New Management
Software for VproX-1000/4000 Control Unit
Special program for the Windows environment to manage the “VproX-1000” and
the VproX-4000 controller units via a PC. The program incorporates user
friendly menus with on line “help”. When a database is created it is
possible to associate the “user name” to each key stored in the memory and
to have access to all configuration parameters.
The software allows for the deletion or addition of keys and operates many
other useful functions. It is also possible to download from the “VproX
system the “event report” memory and to list its contents by name, key
number or chronological date. If the PC program remains connected “on line”,
the screen will show the data of the last 5
entries with the photo ID of last user.
The program is supplied on CD-ROM with a RS232 cable.
When used with the VproX-4000, the software has the following additional
features:
-
Door monitoring when using the VproX-4000/DM module.
-
Make a note of a particular key so that you can be informed when it is
next used.
-
Assign credits to keys so that when all credits are used the key is
disabled. A different number of credits can be assigned to different
doors.
-
Program keys that will only operate once or that will expiry after a
certain date.
-
Reset the time and date on the VproX-4000 CPU to match the PC time and
date.
|